| Customization: | Available |
|---|---|
| After-sales Service: | Over Sea |
| Warranty: | 12 Months |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
LDMC-30A ion nitriding furnace bell type for heating stainless steel with grey layer covered
Nitriding furnace introduce:
Glow ionic nitriding furnace includes ionic triding and lon-carbonitriding .glow ionic nitriding furnace can significantly enhances the surface hardness of steel parts,resistance to damage,fatigue and corrosion;because it has the advantages for energy saving, save gas, high efficiency, good quality, no pollution, etc. It has been applied widely in power, machine tools, petrochemical machinery, textile machinery, mold and other industries.| Name | Description |
| LDMC-30A | Ion Plasma Nitriding Furnace |
| Vacuum furnace body | Φ600×800mm |
| Output voltage | 0-900V Continuous adjustable |
| Maximum output average current | 30A |
| Peak pulse current | 60A |
| Pulse frequency | 1000Hz |
| Working temperature | <=650ºC |
| The rated load | 250kgs |
| Limited vacuum | ≤6.67Pa |
| Rising rate | ≤0.13Pa/min |
| Pumping to 20Pa cost time | ≤30min |
| Arcing time | ≤15μs |
| Control temperature precision | ±1ºC |
| Control pressure precision | ±1Pa |
| The technological process | Automatic control |
| Model | LD(MC)-30 | LD(MC)-50 | LD(MC)-75 | LD(MC)-100 | LD(MC)-150 |
| Working chamber | Ø650*800 | Ø700*1000 | Ø900*1200 | Ø1200*1800 | Ø1600*1400 |
| Max Working temperature | 650ºC | ||||
| Common working temp | 500±50ºC | ||||
| Ultimate vacuum | ≤6.7Pa | ||||
| Pressure rising rate | ≤0.13Pa/min | ||||
| Model | LDMC-30 | LDMC-50 | LDMC-75 | LDMC-100 | LDMC-150 |
| Maximum average output current | 30A | 50A | 75A | 100A | 150A |
| Maximum peak output current | 60A | 100A | 150A | 200A | 300A |
| Max nitride area | 60000cm2 | 100000cm2 | 150000cm2 | 200000cm2 | 300000cm2 |
| Max loading weight | 350kgs | 550kgs | 1000kgs | 1500kgs | 3000kgs |
| Output supply | 0-1000V continue adjust | ||||
| Output status | Rectangular web | ||||
| Frequency | 1000HZ | ||||
| The arc velocity | ≤20 Microsecond | ||||
| Control method | Fixed frequency width | ||||
| Occupy space rate | 0-85% continue adjustable | ||||
Nitriding furnace Images:
Computer automatic control system:
The control system has two modes: manual and automatic.The automatic mode can realize the automatic control of the whole process.Temperature and furnace pressure and other technological parameters are controlled by computer.Input the multi-stage heating (pressure) and heat preservation (pressure) curves corresponding to the target process on the computer, and set the multi-stage arc control, and the process parameters can be corrected in real time;Suitable for the special requirements of ion nitriding.
1. what is the different about Nitriding furnace and Vaccum furnace?
Ion nitriding, also known as glow nitriding, is carried out using the principle of glow discharge. Ion nitriding is to use the metal workpiece as the cathode furnace body as the anode in a low-vacuum furnace filled with nitrogen gas. After being energized, the nitrogen and hydrogen atoms in the medium are ionized under the high-voltage DC electric field, forming a plasma region between the cathodes. to adsorption and diffusion, nitrogen penetrates into the surface of the workpiece.
Under the action of a strong electric field in the plasma area, the positive ions of nitrogen and hydrogen bombard the surface of the workpiece at a high speed. The high kinetic energy of ions is converted into thermal energy, heating the surface of the workpiece to the required temperature. Due to the bombardment of ions, atomic sputtering is generated on the surface of the workpiece, which is purified. At the same time, due to adsorption and diffusion, nitrogen penetrates into the surface of the
workpiece.
The gas nitridingsystem workpiece is placed in the furnace, and the NH3 gas is directly injected into the nitride furnace at 500 to 550ºC, which is maintained for 20 to 100 hours, so that NH3 gas is decomposed into atomic (N) gas and (H) gas for nitriding. The main purpose is to produce a wear-resistant and corrosion-resistant compound layer on the surface of the steel.
2. Precautions for ion nitriding
The cleaning workpiece is nitridized with gas, but it is best to dry or cool and then put it into the furnace to save arcing time. The workpiece should be evenly loaded into the furnace. The interval between the workpiece and the cathode and anode must be more than 30mm, so as to avoid the excessive current density between the two poles and the local temperature of the workpiece being too high. Do a good job of anti-seepage. Any hole less than 2mm must be shielded, and the sample must be placed in a position that can be consistent with the temperature of the workpiece.
3.what kind of work piece can be use with Nitriding furnace ?
4Cr5MoSiV1(H13),3Cr3Mo3W2V,5Cr4W5Mo2V ,20 steel,40 steel,20Cr,20CrMnTi,40Cr/38CrMoAl,42CrMo, 50CrV,,1Cr18Ni9Ti,40 steel,alloy structural steel, bearing steel, spring steel, die steel, tool steel and other materials.
4. what's the max temperature nitriding furnace working for ?
Normal steel working temperature around 520-550 degree,if the Titanium alloy heating temperature must be around 750-800 degrees,this is customized type,you can inquire our sales technical manage.
5. what the work piece layer after nitriding heat treatment?
It according to the work piece features,
){kind=link}